NSN 5305-01-303-7413
High Torque Screw
Between 0.451 inches and 0.481 inches fastener length, pan head style, between 0.309 inches and 0.331 inches head diameter, head height: between 0.088 inches and 0.102 inches .
Manufacturer part number NAS1142-3 for national stock number 5305013037413.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-303-7413.
-
MPN or Model
NAS1142-3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 0.301 inches -
Fastener Length
Between 0.451 inches and 0.481 inches -
Head Style
Pan -
Head Diameter
Between 0.309 inches and 0.331 inches -
Head Height
Between 0.088 inches and 0.102 inches -
Grip Diameter
Between 0.1625 inches and 0.1635 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.164 inches -
Grip Length
Between 0.177 inches and 0.197 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjc -
Specification Data
80205-nas1142 professional/industrial association standard
More from these suppliers
- 5935-00-111-1890 MPN NAS1665-10Electrical Connector Backshell
- 5940-01-451-4414 MPN NAS1063A20-500BBTerminal Board Marker Strip
- 5305-00-005-0631 MPN NAS1509-22Close Tolerance Screw
- 5305-00-005-5809 MPN NAS1631C3Machine Screw
- 5305-00-007-6064 MPN MS35308-556Hexagon Head Cap Screw
- 5305-00-013-7692 MPN NAS1405-14Machine Screw
- 5305-00-035-5382 MPN NAS1581F3H11Close Tolerance Screw
- 5305-00-069-5572 MPN MS90725-84Hexagon Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-303-7413 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1142-3 | National Aerospace Standards |
NAS1142-3 | National Aerospace Standards |
NAS1142-3 | National Aerospace Standards |
NAS1142-3 | National Aerospace Standards |