NSN 5305-01-304-2723
High Torque Screw
Between 0.449 inches and 0.479 inches fastener length, pan head style, between 0.361 inches and 0.385 inches head diameter, head height: between 0.103 inches and 0.118 inches .
Manufacturer part number NAS1143E3 for national stock number 5305013042723.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-304-2723.
-
MPN or Model
NAS1143E3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 0.449 inches and 0.479 inches -
Head Style
Pan -
Head Diameter
Between 0.361 inches and 0.385 inches -
Head Height
Between 0.103 inches and 0.118 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.178 inches and 0.198 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
296.0 brinell tungsten carbide -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1143 professional/industrial association standard
More from these suppliers
- 5940-01-425-6513 MPN NAS1063A5-446Terminal Board Marker Strip
- 5305-00-023-0053 MPN NAS560HK3-26Machine Screw
- 5305-00-052-6912 MPN MS24629-27Tapping Screw
- 5305-00-151-2726 MPN MILS7839Machine Screw
- 5305-00-206-2463 MPN NAS335-16-5Close Tolerance Screw
- 5305-00-282-4201 MPN NAS221-15Machine Screw
- 5305-00-390-0648 MPN NAS1190C04P7LSocket Head Cap Screw
- 5305-00-527-4424 MPN NAS584-7TClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-304-2723 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1143E3 | National Aerospace Standards |
10113670 | Nimikkeistokeskus Ncb Finland |