NSN 5305-01-304-5771
High Torque Screw
Between 1.885 inches and 1.932 inches fastener length, flat countersunk head style, between 0.270 inches and 0.302 inches head diameter, grip diameter: between 0.1860 inches and 0.1890 inches .
Manufacturer part number 1217223-26 for national stock number 5305013045771.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-304-5771.
-
MPN or Model
1217223-26
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.250 inches and 0.317 inches -
Fastener Length
Between 1.885 inches and 1.932 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.270 inches and 0.302 inches -
Grip Diameter
Between 0.1860 inches and 0.1890 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 1.615 inches and 1.635 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
95000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-01-120-1945 MPN 5045-04000-1045Aircraft Pylon
- 5935-01-521-4016 MPN S30212-7Electrical Plug Connector
- 5940-01-521-4427 MPN TS475C001S1-12Terminal Board Cover
- 1560-01-521-5834 MPN 02CD0132-113Aircraft Access Cover
- 5975-01-521-3625 MPN G000809-18CRElectrical-electronic Equipment Chassis
- 5975-01-352-5647 MPN 7167-12310-3Electrical Grounding Plate
- 5305-00-157-5598 MPN 645389G10CVSocket Head Cap Screw
- 5305-00-233-6065 MPN 106385PT3-15Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-304-5771 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
1217223-26 | Sps Technologies, Llc |
S10074-3-26 | L-3 Communications Corporation |
L10074-3-26 | Lfc Industries Inc. |