NSN 5305-01-304-5772
High Torque Screw
Between 1.698 inches and 1.745 inches fastener length, flat countersunk head style, between 0.270 inches and 0.302 inches head diameter, grip diameter: between 0.1860 inches and 0.1890 inches .
Manufacturer part number 1217223-23 for national stock number 5305013045772.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-304-5772.
-
MPN or Model
1217223-23
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.250 inches and 0.317 inches -
Fastener Length
Between 1.698 inches and 1.745 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.270 inches and 0.302 inches -
Grip Diameter
Between 0.1860 inches and 0.1890 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 1.428 inches and 1.448 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
95000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 4920-01-042-8517 MPN 7101A60100-1Aircraft Maintenance Fixture
- 4920-01-104-0488 MPN ETU110-0000-1Msi Test Unit
- 5935-01-529-7790 MPN S30529HA1305C2Electrical Connector Backshell
- 5975-01-521-3634 MPN G000809-20CLElectrical-electronic Equipment Chassis
- 5305-00-078-9636 MPN SFT22-5-11Machine Screw
- 5305-00-324-8493 MPN 110179-5-10Close Tolerance Screw
- 5305-00-424-0555 MPN NAS1190-02P7LSocket Head Cap Screw
- 5305-00-463-0257 MPN NAS1101C02-7BMachine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-304-5772 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
1217223-23 | Sps Technologies, Llc |
S10074-3-23 | L-3 Communications Corporation |
L10074-3-23 | Lfc Industries Inc. |