NSN 5305-01-304-9451
High Torque Screw
Between 1.948 inches and 1.995 inches fastener length, flat countersunk head style, between 0.270 inches and 0.302 inches head diameter, grip diameter: between 0.1860 inches and 0.1890 inches .
Manufacturer part number 1217223-27 for national stock number 5305013049451.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-304-9451.
-
MPN or Model
1217223-27
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.250 inches and 0.317 inches -
Fastener Length
Between 1.948 inches and 1.995 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.270 inches and 0.302 inches -
Grip Diameter
Between 0.1860 inches and 0.1890 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 1.678 inches and 1.698 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
95000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-01-319-5689 MPN S30588-1Electrical Plug Connector
- 1560-01-498-5173 MPN 6250-20134-1Aircraft Structural Component Fitting
- 5930-01-113-7221 MPN TAS8641-430Push Switch
- 5320-01-397-8180 MPN S10110-6-4Pin-rivet Collar
- 5305-00-144-0509 MPN 202-15523-3-10Machine Screw
- 5305-00-288-2424 MPN 66117H5-21Close Tolerance Screw
- 5305-00-901-3936 MPN NAS1204-40Close Tolerance Screw
- 5305-01-025-6961 MPN HT4049-4D14Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-304-9451 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
1217223-27 | Sps Technologies, Llc |
S10074-3-27 | L-3 Communications Corporation |
L10074-3-27 | Lfc Industries Inc. |