NSN 5305-01-308-0168
High Torque Screw
Between 1.189 inches and 1.219 inches fastener length, flat countersunk head style, between 0.717 inches and 0.760 inches head diameter, grip diameter: between 0.3740 inches and 0.3745 inches .
Manufacturer part number LD111-0044-0611 for national stock number 5305013080168.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-308-0168.
-
MPN or Model
LD111-0044-0611
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.491 inches and 0.541 inches -
Fastener Length
Between 1.189 inches and 1.219 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.717 inches and 0.760 inches -
Grip Diameter
Between 0.3740 inches and 0.3745 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.375 inches -
Grip Length
Between 0.678 inches and 0.698 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-007-6214 MPN A1C617-22Externally Relieved Body Screw
- 5305-00-808-3278 MPN NAS1102-04-6Machine Screw
- 5305-00-915-2597 MPN AIC1023H5-26Machine Screw
- 5305-01-107-3524 MPN AIC811-04-24Socket Head Cap Screw
- 5305-01-108-8370 MPN NAS1101E3-16Machine Screw
- 5305-01-254-2786 MPN AIC4406-8Socket Head Cap Screw
- 5305-01-303-5636 MPN AIC939-3-14PClose Tolerance Screw
- 5305-01-332-3167 MPN 965811-306CSocket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-308-0168 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
LD111-0044-0611 | Boeing Company, The |
LD111-0044-0611 | Sps Technologies, Llc |
LD111-0044-0611 | Flanagan Brothers, Inc. |
LD111-0044-0611 | Huck International, Inc. |
LD111-0044-0611 | Sps Technologies, Llc |
LD111-0044-0611 | Sonic Industries Inc. |
LD111-0044-0611 | Hi-shear Corporation |
LD111-0044-0611 | Sps Technologies, Llc |
LD111-0044-0611 | Lisi Aerospace Canada Corp |