NSN 5305-01-308-2917
High Torque Screw
Between 1.486 inches and 1.516 inches fastener length, pan no. 2 head style, between 0.477 inches and 0.492 inches head diameter, head height: between 0.140 inches and 0.150 inches .
Manufacturer part number NAS1578A4H16 for national stock number 5305013082917.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-308-2917.
-
MPN or Model
NAS1578A4H16
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.403 inches -
Fastener Length
Between 1.486 inches and 1.516 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.477 inches and 0.492 inches -
Head Height
Between 0.140 inches and 0.150 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.990 inches and 1.010 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
5790 pounds per square inch -
Material
Steel comp 4140 -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, ty ii, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1578 professional/industrial association standard
More from these suppliers
- 5940-01-452-6925 MPN NAS1063A11-172GTerminal Board Marker Strip
- 5935-01-323-4639 MPN MS33684-18-10PElectrical Connector Insert
- 5940-01-384-3964 MPN NAS1063C5TB177BTerminal Board Marker Strip
- 5935-00-959-6481 MPN NAS715-23BElectrical Receptacle Connector
- 5940-01-451-4411 MPN NAS1063A2-107ALTerminal Board Marker Strip
- 5305-00-004-5069 MPN MS27039-5-17Machine Screw
- 5305-00-057-0498 MPN MS51958-2Machine Screw
- 5305-00-071-2214 MPN MS35274-67Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-308-2917 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1578A4H16 | National Aerospace Standards |