NSN 5305-01-308-3463
High Torque Screw
2.843 inches fastener length, flat countersunk head style, between 0.625 inches and 0.635 inches head diameter, grip diameter: between 0.3108 inches and 0.3117 inches .
Manufacturer part number NAS335CPA26 for national stock number 5305013083463.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-308-3463.
-
MPN or Model
NAS335CPA26
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.531 inches -
Fastener Length
2.843 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.625 inches and 0.635 inches -
Grip Diameter
Between 0.3108 inches and 0.3117 inches -
Single Shear Strength
7300 pounds per square inch -
Internal Drive Style
Cross recess type ii -
Thread Diameter
0.3125 inches -
Grip Length
2.312 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
100.0 degrees -
Material
Steel -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf -
Specification Data
80205-nas335 professional/industrial association standard
More from these suppliers
- 5940-01-444-8248 MPN NAS1063A3-504ACTerminal Board Marker Strip
- 5940-00-827-0772 MPN NAS1063A6-1Terminal Board Marker Strip
- 5305-00-021-4078 MPN NAS1221-3-3Machine Screw
- 5305-00-052-5992 MPN NAS333CP17Close Tolerance Screw
- 5305-00-068-0542 MPN MS24678-7CSocket Head Cap Screw
- 5305-00-068-5398 MPN NAS1351C3H6Socket Head Cap Screw
- 5305-00-071-2503 MPN MS24694A117Machine Screw
- 5305-00-081-2651 MPN MS51038-15Setscrew
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-308-3463 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS335CPA26 | National Aerospace Standards |