NSN 5305-01-308-8203
High Torque Screw
Between 0.579 inches and 0.609 inches fastener length, fillister countersunk head style, between 0.2996 inches and 0.3016 inches head diameter, head height: 0.013 inches .
Manufacturer part number PY12455-3-3 for national stock number 5305013088203.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-308-8203.
-
MPN or Model
PY12455-3-3
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.381 inches and 0.431 inches -
Fastener Length
Between 0.579 inches and 0.609 inches -
Head Style
Fillister countersunk -
Head Diameter
Between 0.2996 inches and 0.3016 inches -
Head Height
0.013 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.178 inches and 0.198 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Nickel alloy 718 -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-038-9411 MPN AIC1184-317Close Tolerance Screw
- 5305-00-255-5517 MPN NAS1101-08-18Machine Screw
- 5305-00-308-1587 MPN AIC811-04-13Socket Head Cap Screw
- 5305-00-508-6231 MPN LS15266V3-8Close Tolerance Screw
- 5305-00-809-1422 MPN 51B333-5Machine Screw
- 5305-01-170-4571 MPN BACB30LK2-4Close Tolerance Screw
- 5305-01-303-6353 MPN AIC939-3-8Close Tolerance Screw
- 5305-01-646-1892 MPN JSFB22V5-8Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-308-8203 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
PY12455-3-3 | Sps Technologies, Llc |
SC5087-3-3 | Arconic Global Fasteners & Rings, |
124894-3-3 | Sps Technologies, Llc |
AIC939-3-3 | Sps Technologies, Llc |
SC1823-3-3 | Arconic Global Fasteners & Rings, |
HR248-3-3PX | Hi-shear Corporation |
3M939-3-3 | Boeing Company, The |
124894-3-3 | Sps Technologies, Llc |
HR248-3-3PX | Lisi Aerospace Canada Corp |
VT1731-3-3 | Alcoa Global Fasteners, Inc. |
GS1018-3-3 | B & B Specialties Inc. |