NSN 5305-01-309-5457
High Torque Screw
Between 0.949 inches and 0.979 inches fastener length, flat countersunk head style, between 0.328 inches and 0.337 inches head diameter, grip diameter: between 0.1621 inches and 0.1627 inches .
Manufacturer part number NAS1152-11 for national stock number 5305013095457.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-309-5457.
-
MPN or Model
NAS1152-11
-
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 0.949 inches and 0.979 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.328 inches and 0.337 inches -
Grip Diameter
Between 0.1621 inches and 0.1627 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.164 inches -
Grip Length
Between 0.673 inches and 0.703 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp 4140 or steel comp 4340 -
Material Specification
Mil-s-5626 military standard all material responses -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, ty ii, cl 2 federal specification single treatment response -
Thread Series Designator
Unjc -
Specification Data
80205-nas1152 professional/industrial association standard
More from these suppliers
- 5940-01-375-3646 MPN NAS1063A8-4MLSTerminal Board Marker Strip
- 5940-01-451-2633 MPN NAS1063A10-105BLTerminal Board Marker Strip
- 1680-01-547-3391 MPN NAS77A8-008NPre Flanged Bushing
- 1560-01-594-5017 MPN NAS1919C04-05PAircraft Stiffener
- 5940-01-384-3975 MPN NAS1063B3-3Terminal Board Marker Strip
- 5305-00-007-0280 MPN NAS1100C06-18PMachine Screw
- 5305-00-008-5845 MPN NAS1632C7Machine Screw
- 5305-00-008-5892 MPN NAS1102E08-30Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-309-5457 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1152-11 | National Aerospace Standards |