NSN 5305-01-309-7058
High Torque Screw
Between 1.191 inches and 1.221 inches fastener length, flat countersunk head style, between 0.951 inches and 1.014 inches head diameter, grip diameter: between 0.4985 inches and 0.4995 inches .
Manufacturer part number NAS1580A8T7 for national stock number 5305013097058.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-309-7058.
-
MPN or Model
NAS1580A8T7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.743 inches and 0.793 inches -
Fastener Length
Between 1.191 inches and 1.221 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.951 inches and 1.014 inches -
Grip Diameter
Between 0.4985 inches and 0.4995 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.500 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp 4140 or steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-6049 military specification 3rd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 ty2 cl2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1580 professional/industrial association standard
More from these suppliers
- 1680-01-524-1349 MPN NAS520-12-9Aircr Air Duct Hose
- 1680-01-662-0850 MPN NAS1057W3B-047Spacer A378 Nrp
- 5940-01-451-4311 MPN NAS1744-1Conductor Splice
- 5305-00-008-5887 MPN NAS1102C06-10PMachine Screw
- 5305-00-008-9115 MPN NAS1190C02T7LSocket Head Cap Screw
- 5305-00-051-6719 MPN MS3212-2Machine Screw
- 5305-00-055-6294 MPN NAS1352C04A4Socket Head Cap Screw
- 5305-00-057-0480 MPN MS24694C115Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-309-7058 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580A8T7 | National Aerospace Standards |
NAS1580A8T7 | National Aerospace Standards |
NAS1580A8T7 | National Aerospace Standards |