NSN 5305-01-310-5825
High Torque Screw
Between 2.813 inches and 2.860 inches fastener length, flat countersunk head style, between 0.752 inches and 0.762 inches head diameter, grip diameter: between 0.3733 inches and 0.3742 inches .
Manufacturer part number NAS336CA26 for national stock number 5305013105825.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-310-5825.
-
MPN or Model
NAS336CA26
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.641 inches -
Fastener Length
Between 2.813 inches and 2.860 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.752 inches and 0.762 inches -
Grip Diameter
Between 0.3733 inches and 0.3742 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole -
Internal Drive Style
Hexagon -
Thread Diameter
0.375 inches -
Grip Length
2.188 inches -
Width Across Flats
Between 0.2197 inches and 0.2217 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
100.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.750 inches first hole -
Surface Finish
32.0 microinches threads -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 -
Material Specification
Mil-s-5656 military specification 1st material response or mil-s-8844 military specification 2nd material response or ams6414 assn standard 2nd material response or mil-s-6049 military specification 3rd material response -
Surface Treatment
Cadmium grip -
Thread Series Designator
Unjf -
Specification Data
80205-nas336 professional/industrial association standard
More from these suppliers
- 5940-01-408-4280 MPN NAS1063A2-TB107CETerminal Board Marker Strip
- 5905-01-604-0709 MPN 4610X-101-154LFFilm Fixed Resistor Network
- 5940-01-451-4409 MPN NAS1063A2-107AKTerminal Board Marker Strip
- 5305-00-052-6867 MPN MS24627-37Tapping Screw
- 5305-00-052-7428 MPN MS35198-88Machine Screw
- 5305-00-052-9048 MPN MS24630-33Tapping Screw
- 5305-00-067-9911 MPN MS24667-16Socket Head Cap Screw
- 5305-00-115-9767 MPN NAS1623-6DMachine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-310-5825 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS336CA26 | National Aerospace Standards |
NAS336CA26 | National Aerospace Standards |
NAS336CA26 | National Aerospace Standards |