NSN 5305-01-311-6249
High Torque Screw
1.121 inches fastener length, fillister countersunk head style, between 0.4360 inches and 0.4370 inches grip diameter, internal drive style: hexagon.
Manufacturer part number AIC9535-7-7 for national stock number 5305013116249.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-311-6249.
-
MPN or Model
AIC9535-7-7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.668 inches and 0.698 inches -
Fastener Length
1.121 inches -
Head Style
Fillister countersunk -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Internal Drive Style
Hexagon -
Thread Diameter
0.438 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Steel -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-431-7334 MPN NAS1102-04-24Machine Screw
- 5305-01-189-8443 MPN LE111-0041-2304Close Tolerance Screw
- 5305-01-270-1236 MPN LE111-0032-2432Machine Screw
- 5305-01-303-9652 MPN AIC1147-3-24PClose Tolerance Screw
- 5305-01-352-2747 MPN AIC1651-3-4Close Tolerance Screw
- 5305-01-366-2783 MPN ST3M466V4L27-1Close Tolerance Screw
- 5305-01-397-5901 MPN AIC1652-3-16Close Tolerance Screw
- 5305-01-435-6292 MPN BACB30LU9-18Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-311-6249 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC9535-7-7 | Sps Technologies, Llc |
PBF1198-7-7 | Sps Technologies, Llc |
121754-7-7 | Sps Technologies, Llc |
C9535-7-7 | Lockheed Martin Corporation |
VT1696-7-7 | Alcoa Global Fasteners, Inc. |