NSN 5305-01-312-0702
High Torque Screw
Between 2.032 inches and 2.062 inches fastener length, flat countersunk head style, between 0.959 inches and 1.017 inches head diameter, grip diameter: between 0.4985 inches and 0.4995 inches .
Manufacturer part number NAS1978C21H for national stock number 5305013120702.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-312-0702.
-
MPN or Model
NAS1978C21H
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.710 inches and 0.760 inches -
Fastener Length
Between 2.032 inches and 2.062 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.959 inches and 1.017 inches -
Grip Diameter
Between 0.4985 inches and 0.4995 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.500 inches -
Grip Length
Between 1.302 inches and 1.322 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response or ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1978 professional/industrial association standard
More from these suppliers
- 5940-00-990-1658 MPN NAS705G2Stud Terminal
- 5935-01-191-4127 MPN MS25043-28DAElectrical Connector Cover
- 5305-00-006-9408 MPN MS3212-5Machine Screw
- 5305-00-007-2943 MPN NAS1100E06-9PMachine Screw
- 5305-00-008-5813 MPN NAS1742C06R10Socket Head Cap Screw
- 5305-00-038-2431 MPN NAS514P632-22BMachine Screw
- 5305-00-052-5941 MPN MS35198-83Machine Screw
- 5305-00-071-2231 MPN MS90725-20Hexagon Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-312-0702 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1978C21H | National Aerospace Standards |
Stock Check
- NE: 15