NSN 5305-01-312-0703
High Torque Screw
Between 1.628 inches and 1.658 inches fastener length, flat countersunk head style, between 0.951 inches and 1.014 inches head diameter, grip diameter: between 0.4985 inches and 0.4995 inches .
Manufacturer part number NAS1580A8H14 for national stock number 5305013120703.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-312-0703.
-
MPN or Model
NAS1580A8H14
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.743 inches and 0.793 inches -
Fastener Length
Between 1.628 inches and 1.658 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.951 inches and 1.014 inches -
Grip Diameter
Between 0.4985 inches and 0.4995 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.500 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp 4140 or steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-6049 military specification 3rd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1580 professional/industrial association standard
More from these suppliers
- 5940-01-498-1857 MPN NAS1063D-1-3Terminal Board Marker Strip
- 5305-00-007-1588 MPN NAS1102E02-6PMachine Screw
- 5305-00-143-1840 MPN MS21091-04004Socket Head Cap Screw
- 5305-00-177-5717 MPN NAS1100C06-54Machine Screw
- 5305-00-197-2398 MPN MS27039C1-31Machine Screw
- 5305-00-225-3849 MPN MS24693-A298Machine Screw
- 5305-00-267-8978 MPN MS90726-12Hexagon Head Cap Screw
- 5305-00-338-3303 MPN NAS666V7HTClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-312-0703 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1580A8H14 | National Aerospace Standards |