NSN 5305-01-312-5872
High Torque Screw
2.070 inches fastener length, between 0.3735 inches and 0.3745 inches grip diameter, offset cruciform (torque set) internal drive style, thread diameter: 0.375 inches.
Manufacturer part number AIC9535-6-24 for national stock number 5305013125872.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-312-5872.
-
MPN or Model
AIC9535-6-24
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.555 inches and 0.585 inches -
Fastener Length
2.070 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.375 inches -
Grip Length
Between 1.480 inches and 1.500 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Steel -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-147-6197 MPN AIC1023V5-6Close Tolerance Screw
- 5305-00-505-2797 MPN LS15267V3-13Machine Screw
- 5305-00-505-3406 MPN LS15264V04-11Machine Screw
- 5305-01-086-9288 MPN BACB30AB-P4-9Close Tolerance Screw
- 5305-01-206-3444 MPN AIC4037-04-05Machine Screw
- 5305-01-232-1443 MPN 3M925C5-12AClose Tolerance Screw
- 5305-01-381-5721 MPN AIC1652-4-33Close Tolerance Screw
- 5305-01-452-6453 MPN LD111-0045-2407Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-312-5872 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC9535-6-24 | Sps Technologies, Llc |
C9535-6-24 | Lockheed Martin Corporation |
VT1696-6-24 | Alcoa Global Fasteners, Inc. |