NSN 5305-01-312-8061
High Torque Screw
Between 0.829 inches and 0.859 inches fastener length, oval countersunk head style, between 0.3898 inches and 0.3948 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number 3M963-4L6 for national stock number 5305013128061.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-312-8061.
-
MPN or Model
3M963-4L6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.444 inches and 0.494 inches -
Fastener Length
Between 0.829 inches and 0.859 inches -
Head Style
Oval countersunk -
Head Diameter
Between 0.3898 inches and 0.3948 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp 8740 -
Material Specification
Mil-s-6049 military specification single material response -
Surface Treatment
Aluminum -
Surface Treatment Specification
Mil-c-83488, type 2 cl 3 military specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
76301-3-963 manufacturers standard
More from these suppliers
- 5305-00-005-0623 MPN 51B221-40Close Tolerance Screw
- 5305-00-187-5610 MPN NAS1101E08-24Machine Screw
- 5305-00-310-5469 MPN AIC811-08-14Socket Head Cap Screw
- 5305-00-492-3093 MPN LS15264-08-7Machine Screw
- 5305-00-725-5917 MPN AIC813-4-R23Machine Screw
- 5305-00-935-7513 MPN NAS110-00-3Machine Screw
- 5305-01-014-8313 MPN NAS1101E04-5Machine Screw
- 5305-01-050-9652 MPN BACB30LR4U21Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-312-8061 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3M963-4L6 | Boeing Company, The |
3M963-4L6 | Sps Technologies, Llc |
3M963-4L6 | Arconic Global Fasteners & Rings, |
3M963-4L6 | Sps Technologies, Llc |
3M963-4L6 | Abounding Security Inc |
3M963-4L6 | Huck International, Inc. |
3M963-4L6 | Huck Intl Inc |