NSN 5305-01-314-5483
High Torque Screw
Between 1.203 inches and 1.250 inches fastener length, flat countersunk head style, between 0.429 inches and 0.479 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number PBF1211-5-12F for national stock number 5305013145483.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-314-5483.
-
MPN or Model
PBF1211-5-12F
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.443 inches and 0.510 inches -
Fastener Length
Between 1.203 inches and 1.250 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.429 inches and 0.479 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
Torque-set ribbed -
Thread Diameter
0.312 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Countersink Angle
Between 90.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Ams 2401 assn standard single treatment response or nas 672 assn standard single treatment response or mil-c-8837 type 2, cl 2 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-083-3365 MPN HT8138-3-3Close Tolerance Screw
- 5305-00-345-1582 MPN LS15265V4-20Close Tolerance Screw
- 5305-00-395-3441 MPN HT4024L5-6-1Close Tolerance Screw
- 5305-00-551-4843 MPN HT4025L4-13Close Tolerance Screw
- 5305-01-010-2364 MPN HT4016-4-7XShoulder Screw
- 5305-01-141-7915 MPN HT4016-3-15XShoulder Screw
- 5305-01-159-1294 MPN HT4016-5-8Close Tolerance Screw
- 5305-01-197-0949 MPN BACS12CK3U7Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-314-5483 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
PBF1211-5-12F | Sps Technologies, Llc |
GB510CB5-12 | Northrop Grumman Systems Corporation |
SCD1825-5-12 | Arconic Global Fasteners & Rings, |
HR207-5-12 | Hi-shear Corporation |
121825-5-12 | Sps Technologies, Llc |
HR207-5-12 | Lisi Aerospace Canada Corp |
PBF1211-5-12F | Sps Technologies, Llc |
GB510CB5-12 | Northrop Grumman Systems Corporation |
SCD1825-5-12 | Arconic Global Fasteners & Rings, |
121825-5-12 | Sps Technologies, Llc |
HR207-5-12 | Hi-shear Corporation |