NSN 5305-01-314-5485
High Torque Screw
Between 2.938 inches and 2.968 inches fastener length, flat countersunk head style, between 0.751 inches and 0.762 inches head diameter, grip diameter: between 0.3735 inches and 0.3745 inches .
Manufacturer part number NAS1976-38H for national stock number 5305013145485.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-314-5485.
-
MPN or Model
NAS1976-38H
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.553 inches and 0.603 inches -
Fastener Length
Between 2.938 inches and 2.968 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.751 inches and 0.762 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.375 inches -
Grip Length
Between 2.365 inches and 2.385 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Steel comp 4140 or steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-6049 military specification 3rd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1976 professional/industrial association standard
More from these suppliers
- 5935-00-253-5011 MPN NAS1650R22B55SXElectrical Receptacle Connector
- 1680-01-501-4805 MPN NAS42DD8-80FCAircr Sleeve Spacer
- 5305-00-004-5178 MPN NAS1100V3-7Machine Screw
- 5305-00-007-9895 MPN NAS1102E04-12PMachine Screw
- 5305-00-043-2683 MPN MS24694S93Machine Screw
- 5305-00-052-5922 MPN MS35198-68Machine Screw
- 5305-00-052-5972 MPN MS35202-42Machine Screw
- 5305-00-052-6944 MPN NAS1219-3-14PMachine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

Pricing and Availability
Get a quote for 5305-01-314-5485 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1976-38H | National Aerospace Standards |
Stock Check

- NE: 775
- NS: 22