NSN 5305-01-316-2919
High Torque Screw
Between 1.902 inches and 1.949 inches fastener length, flat countersunk head style, between 0.578 inches and 0.634 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number PBF1202-5-23 for national stock number 5305013162919.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-316-2919.
-
MPN or Model
PBF1202-5-23
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.454 inches and 0.521 inches -
Fastener Length
Between 1.902 inches and 1.949 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.578 inches and 0.634 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
Torque-set ribbed -
Thread Diameter
0.312 inches -
Grip Length
Between 1.428 inches and 1.448 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Nas 672 assn standard single treatment response or mil-c-8837 type 2, cl 2 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-395-3440 MPN HT4024-L5-16-1Close Tolerance Screw
- 5305-00-448-8661 MPN BACB30RF3-2Close Tolerance Screw
- 5305-01-051-5506 MPN C7985-3D7Close Tolerance Screw
- 5305-01-103-3242 MPN 3M926-4L15Close Tolerance Screw
- 5305-01-379-4163 MPN SC2177T04-16Machine Screw
- 5305-01-417-2490 MPN 3M1169V-3-14Close Tolerance Screw
- 5305-01-465-2366 MPN TX1026V3-12AClose Tolerance Screw
- 5305-01-491-4236 MPN 03A519-4-10CClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-316-2919 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
PBF1202-5-23 | Sps Technologies, Llc |
GB510CE5-23 | Northrop Grumman Systems Corporation |
SCD1779-5-23 | Arconic Global Fasteners & Rings, |
HR204JK-5-23 | Hi-shear Corporation |
106706-5-23 | Sps Technologies, Llc |
HR204JK-5-23 | Lisi Aerospace Canada Corp |
PBF1202-5-23 | Sps Technologies, Llc |
GB510CE5-23 | Northrop Grumman Systems Corporation |
SCD1779-5-23 | Arconic Global Fasteners & Rings, |
106706-5-23 | Sps Technologies, Llc |
HR204JK-5-23 | Hi-shear Corporation |