NSN 5305-01-320-8059
High Torque Screw
Between 2.327 inches and 2.357 inches fastener length, flat countersunk head style, between 0.625 inches and 0.635 inches head diameter, grip diameter: between 0.3110 inches and 0.3120 inches .
Manufacturer part number NAS2805-29 for national stock number 5305013208059.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-320-8059.
-
MPN or Model
NAS2805-29
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.530 inches -
Fastener Length
Between 2.327 inches and 2.357 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.625 inches and 0.635 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
Between 1.802 inches and 1.822 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp 4140 or steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-6049 military specification 3rd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas2805 professional/industrial association standard
More from these suppliers
- 5940-00-069-2417 MPN NAS1744-2Conductor Splice
- 5935-00-111-4884 MPN NAS1666-22Electrical Connector Cable Clamp
- 5985-01-192-2031 MPN 5035749-3Antenna Position Programmer
- 5940-01-418-3341 MPN NAS1063D-1-6Terminal Board Marker Strip
- 5940-01-437-8564 MPN NAS1063A2-107CYTerminal Board Marker Strip
- 5305-00-051-2326 MPN NASM51958Machine Screw
- 5305-00-052-6917 MPN MS24629-50Tapping Screw
- 5305-00-058-2090 MPN MS24618-50Tapping Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-320-8059 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS2805-29 | National Aerospace Standards |
NAS1975-29T | National Aerospace Standards |