NSN 5305-01-320-8060
High Torque Screw
Between 1.073 inches and 1.103 inches fastener length, flat chamfer head style, between 0.265 inches and 0.270 inches head diameter, head height: between 0.088 inches and 0.102 inches .
Manufacturer part number NAS1122-13 for national stock number 5305013208060.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-320-8060.
-
MPN or Model
NAS1122-13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 1.073 inches and 1.103 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.265 inches and 0.270 inches -
Head Height
Between 0.088 inches and 0.102 inches -
Grip Diameter
Between 0.1625 inches and 0.1635 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.164 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Surface Finish
32.0 microinches threads -
Material
Steel comp 4140 or steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-6049 military specification 3rd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjc -
Specification Data
80205-nas1122 professional/industrial association standard
More from these suppliers
- 5940-00-243-7679 MPN NAS704S2Stud Terminal
- 5940-01-447-2283 MPN NAS1063B-9-14Terminal Board Marker Strip
- 5305-00-057-0524 MPN NASM51958Machine Screw
- 5305-00-078-0178 MPN NAS1352-06LN12Socket Head Cap Screw
- 5305-00-079-1749 MPN MS24694S29Machine Screw
- 5305-00-079-7974 MPN MS24694S224Machine Screw
- 5305-00-114-1911 MPN NAS1352-10LE96PSocket Head Cap Screw
- 5305-00-180-3326 MPN MILS7839Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-320-8060 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1122-13 | National Aerospace Standards |