NSN 5305-01-320-8068
High Torque Screw
Between 1.172 inches and 1.202 inches fastener length, flat chamfer head style, between 0.429 inches and 0.438 inches head diameter, head height: between 0.162 inches and 0.183 inches .
Manufacturer part number NAS1125V13 for national stock number 5305013208068.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-320-8068.
-
MPN or Model
NAS1125V13
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
136500 - Metal NOI/metal Alloys NOI -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.375 inches -
Fastener Length
Between 1.172 inches and 1.202 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.429 inches and 0.438 inches -
Head Height
Between 0.162 inches and 0.183 inches -
Grip Diameter
Between 0.3106 inches and 0.3120 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Titanium alloy uns r56400 -
Material Specification
Ams 4967 assn standard single material response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1125 professional/industrial association standard
More from these suppliers
- 5905-01-008-5287 MPN NAS1379P2NWirewound Fixed Resistor Network
- 5935-01-045-8087 MPN NAS1653R16B26SNElectrical Plug Connector
- 5940-01-652-2533 MPN NAS1063A4-TB138RDTerminal Board Marker Strip
- 5940-01-451-4407 MPN NAS1063A10-105BVTerminal Board Marker Strip
- 5940-01-451-4407 MPN NAS1063A10-105BVTerminal Board Marker Strip
- 5305-00-003-9326 MPN NAS6002U16Machine Screw
- 5305-00-007-0279 MPN NAS1100C06-14PMachine Screw
- 5305-00-008-5885 MPN NAS1102E06-7PMachine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-320-8068 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1125V13 | National Aerospace Standards |