NSN 5305-01-321-4111
High Torque Screw
Between 2.110 inches and 2.140 inches fastener length, pan head style, between 0.594 inches and 0.615 inches head diameter, head height: between 0.203 inches and 0.218 inches .
Manufacturer part number NAS1135E28 for national stock number 5305013214111.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-321-4111.
-
MPN or Model
NAS1135E28
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.375 inches -
Fastener Length
Between 2.110 inches and 2.140 inches -
Head Style
Pan -
Head Diameter
Between 0.594 inches and 0.615 inches -
Head Height
Between 0.203 inches and 0.218 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
Between 1.740 inches and 1.760 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1135 professional/industrial association standard
More from these suppliers
- 5940-01-384-3944 MPN NAS1063A2TB107ACTerminal Board Marker Strip
- 5305-00-007-0287 MPN NAS1131C88PClose Tolerance Screw
- 5305-00-068-0472 MPN MS35199-67Machine Screw
- 5305-00-115-6084 MPN NAS1351C06-6Socket Head Cap Screw
- 5305-00-115-9936 MPN NAS1351-3H36PSocket Head Cap Screw
- 5305-00-143-1986 MPN NAS1625-30Machine Screw
- 5305-00-182-7460 MPN NAS1351-04LE4PSocket Head Cap Screw
- 5305-00-206-3693 MPN MS35198-71Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-321-4111 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1135E28 | National Aerospace Standards |