NSN 5305-01-321-5071
High Torque Screw
Between 1.386 inches and 1.416 inches fastener length, flat chamfer head style, between 0.265 inches and 0.270 inches head diameter, head height: between 0.088 inches and 0.102 inches .
Manufacturer part number NAS1632-18 for national stock number 5305013215071.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-321-5071.
-
MPN or Model
NAS1632-18
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 1.386 inches and 1.416 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.265 inches and 0.270 inches -
Head Height
Between 0.088 inches and 0.102 inches -
Grip Diameter
Between 0.1625 inches and 0.1635 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.164 inches -
Grip Length
Between 1.115 inches and 1.135 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Surface Finish
32.0 microinches threads -
Material
Steel comp 4140 or steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-6049 military specification 3rd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1122 professional/industrial association standard
More from these suppliers
- 5305-00-006-2287 MPN NAS1154-16DClose Tolerance Screw
- 5305-00-007-9895 MPN NAS1102E04-12PMachine Screw
- 5305-00-008-5898 MPN NAS1191-04P4LSocket Head Cap Screw
- 5305-00-053-1114 MPN MS51861-15Tapping Screw
- 5305-00-068-5401 MPN MS16996-1Socket Head Cap Screw
- 5305-00-075-5831 MPN NAS1156-14Close Tolerance Screw
- 5305-00-105-9425 MPN NAS1635-08LL6PSocket Head Cap Screw
- 5305-00-225-7773 MPN MS16996-22Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-321-5071 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1632-18 | National Aerospace Standards |
NAS1122-18 | National Aerospace Standards |