NSN 5305-01-321-8740
High Torque Screw
Between 3.301 inches and 3.331 inches fastener length, flat chamfer head style, between 0.365 inches and 0.375 inches head diameter, head height: between 0.133 inches and 0.150 inches .
Manufacturer part number NAS1124-48 for national stock number 5305013218740.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-321-8740.
-
MPN or Model
NAS1124-48
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.316 inches -
Fastener Length
Between 3.301 inches and 3.331 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.365 inches and 0.375 inches -
Head Height
Between 0.133 inches and 0.150 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 2.990 inches and 3.010 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Surface Finish
32.0 microinches threads -
Material
Steel comp 4140 or steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-6049 military specification 3rd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1124 professional/industrial association standard
More from these suppliers
- 5940-01-451-4414 MPN NAS1063A20-500BBTerminal Board Marker Strip
- 5305-00-003-9278 MPN NAS1221-4E42Machine Screw
- 5305-00-007-6178 MPN NAS1100E02-13Machine Screw
- 5305-00-055-5781 MPN MS24677-62Socket Head Cap Screw
- 5305-00-225-6208 MPN MS24694A113Machine Screw
- 5305-00-269-2805 MPN MS90726-62Hexagon Head Cap Screw
- 5305-00-338-2052 MPN NAS1153E17Close Tolerance Screw
- 5305-00-419-0820 MPN MS16996-10BSocket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-321-8740 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1124-48 | National Aerospace Standards |