NSN 5305-01-323-0227
High Torque Screw
Between 2.551 inches and 2.581 inches fastener length, pan head style, between 0.473 inches and 0.492 inches head diameter, head height: between 0.162 inches and 0.175 inches .
Manufacturer part number NAS1134V36 for national stock number 5305013230227.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-323-0227.
-
MPN or Model
NAS1134V36
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.316 inches -
Fastener Length
Between 2.551 inches and 2.581 inches -
Head Style
Pan -
Head Diameter
Between 0.473 inches and 0.492 inches -
Head Height
Between 0.162 inches and 0.175 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 2.240 inches and 2.260 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Titanium alloy uns r56400 -
Material Specification
Ams 4967 assn standard single material response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1134 professional/industrial association standard
More from these suppliers
- 1560-01-571-8130 MPN NAS1677D29W37NAir Retaining Strap
- 5940-01-384-3955 MPN NAS1063A20TB42CTerminal Board Marker Strip
- 5940-01-451-4001 MPN NAS1063A10-105BSTerminal Board Marker Strip
- 5305-00-007-0282 MPN NAS1100E08-12PMachine Screw
- 5305-00-008-5914 MPN NAS1100C06-28Machine Screw
- 5305-00-061-7961 MPN NAS1503-7Machine Screw
- 5305-00-087-2995 MPN MS24677-29Socket Head Cap Screw
- 5305-00-116-5024 MPN NAS1100C6-16Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-323-0227 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1134V36 | National Aerospace Standards |