NSN 5305-01-323-4155
High Torque Screw
Between 1.690 inches and 1.720 inches fastener length, flat countersunk head style, between 0.3504 inches and 0.3988 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number HR218-4-21D for national stock number 5305013234155.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-323-4155.
-
MPN or Model
HR218-4-21D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.403 inches -
Fastener Length
Between 1.690 inches and 1.720 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.3504 inches and 0.3988 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Internal Drive Style
Torque-set ribbed -
Thread Diameter
0.250 inches -
Grip Length
Between 1.292 inches and 1.312 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.564 inches first hole and 1.614 inches first hole -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-027-2007 MPN HT4020-5-10AClose Tolerance Screw
- 5305-01-028-0186 MPN HT1029A-5-10Close Tolerance Screw
- 5305-01-079-5160 MPN ST3M454-4L29Close Tolerance Screw
- 5305-01-101-3329 MPN HT4072-3-2-5Close Tolerance Screw
- 5305-01-102-8456 MPN HT4067-3-11Close Tolerance Screw
- 5305-01-143-4087 MPN HT4020-5-13AXShoulder Screw
- 5305-01-145-5449 MPN HT4041-7-16-9XShoulder Screw
- 5305-01-268-5980 MPN HT4020-5-16XShoulder Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-323-4155 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HR218-4-21D | Hi-shear Corporation |
HR218-4-21D | Lisi Aerospace Canada Corp |
GB510DC4-21D | Northrop Grumman Systems Corporation |
SCT1826-4-21D | Arconic Global Fasteners & Rings, |
PBF1357A4-D21 | Sps Technologies, Llc |
129968A-4-D21 | Sps Technologies, Llc |
GB510DC4-21D | Aero Mechanical Fastening Systems |
AMS504A4D21 | Aero Mechanical Fastening Systems |
GB510DC4-21D | Abounding Security Inc |
MATS111AD4-21 | Abounding Security Inc |