NSN 5305-01-326-2697
High Torque Screw
Between 1.073 inches and 1.103 inches fastener length, fillister head style, between 0.306 inches and 0.316 inches head diameter, head height: between 0.103 inches and 0.118 inches .
Manufacturer part number NAS1123V13 for national stock number 5305013262697.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-326-2697.
-
MPN or Model
NAS1123V13
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 1.073 inches and 1.103 inches -
Head Style
Fillister -
Head Diameter
Between 0.306 inches and 0.316 inches -
Head Height
Between 0.103 inches and 0.118 inches -
Grip Diameter
Between 0.1881 inches and 0.1887 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Titanium alloy uns r56400 -
Material Specification
Ams 4967 assn standard single material response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1123 manufacturers standard
More from these suppliers
- 5940-01-448-0168 MPN NAS1063A2-107ASTerminal Board Marker Strip
- 4920-01-536-8668 MPN NAS1213R10J84Airc Strap Assembly
- 5940-01-384-3971 MPN NAS1063D2-2Terminal Board Marker Strip
- 5940-01-451-4407 MPN NAS1063A10-105BVTerminal Board Marker Strip
- 5935-01-218-6323 MPN NAS1100C08-8Screw
- 5305-00-007-2943 MPN NAS1100E06-9PMachine Screw
- 5305-00-007-2951 MPN NAS1100C01-7Machine Screw
- 5305-00-008-5888 MPN NAS1102E06-12PMachine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-326-2697 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1123V13 | National Aerospace Standards |