NSN 5305-01-329-0386
High Torque Screw
Between 0.996 inches and 1.026 inches fastener length, pan head style, between 0.357 inches and 0.373 inches head diameter, head height: between 0.122 inches and 0.133 inches .
Manufacturer part number NAS7703-11 for national stock number 5305013290386.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-329-0386.
-
MPN or Model
NAS7703-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.323 inches -
Fastener Length
Between 0.996 inches and 1.026 inches -
Head Style
Pan -
Head Diameter
Between 0.357 inches and 0.373 inches -
Head Height
Between 0.122 inches and 0.133 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Grip Length
Between 0.678 inches and 0.698 inches -
Thready Qty Per Inch (tpi)
32 -
Material
Steel comp 4340 -
Material Specification
Mil-s-5000 military specification single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type ii, class 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas7703-11 professional/industrial association standard
More from these suppliers
- 5305-00-007-1550 MPN NAS1131E96PClose Tolerance Screw
- 5305-00-008-5893 MPN NAS1102E08-8PMachine Screw
- 5305-00-051-2334 MPN MS51958-108Machine Screw
- 5305-00-052-8236 MPN MS51861-52Tapping Screw
- 5305-00-121-2408 MPN NAS1635-06LL14Socket Head Cap Screw
- 5305-00-144-9830 MPN NAS1582C4T8Machine Screw
- 5305-00-269-4222 MPN MS24694S164Machine Screw
- 5305-00-508-2819 MPN NAS1216E08-36Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-329-0386 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS7703-11 | National Aerospace Standards |