NSN 5305-01-329-1091
High Torque Screw
Between 0.386 inches and 0.416 inches fastener length, pan head style, between 0.357 inches and 0.373 inches head diameter, head height: between 0.122 inches and 0.133 inches .
Manufacturer part number NAS1133E2P for national stock number 5305013291091.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-329-1091.
-
MPN or Model
NAS1133E2P
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.251 inches and 1.301 inches -
Fastener Length
Between 0.386 inches and 0.416 inches -
Head Style
Pan -
Head Diameter
Between 0.357 inches and 0.373 inches -
Head Height
Between 0.122 inches and 0.133 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.115 inches and 0.135 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams5737 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, ty2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-180-2603 MPN NAS1650-83ASNFElectrical Receptacle Connector
- 5935-00-430-6550 MPN M81511-18-22Electrical Connector Cover
- 5935-00-520-8570 MPN NAS1641R12T12SNElectrical Receptacle Connector
- 5940-00-836-0091 MPN NAS705G3Stud Terminal
- 1680-01-479-7276 MPN NAS354-5-1488Rod
- 1680-01-544-9075 MPN NAS1375A16SA283Mater Aircraft Hose
- 1680-01-547-3391 MPN NAS77A8-008PPre Flanged Bushing
- 5940-01-451-4311 MPN NAS1744-1Conductor Splice
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-329-1091 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1133E2P | National Aerospace Standards |