NSN 5305-01-330-3394
High Torque Screw
Spanner drive.
Manufacturer part number 03A200-4-10 for national stock number 5305013303394.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-330-3394.
-
MPN or Model
03A200-4-10
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
Between 1.035 inches and 1.065 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.486 inches and 0.507 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches -
Material
Titanium alloy uns r56400 -
Material Specification
Ams4928 assn standard single material response or ams4967 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-040-9879 MPN 53B333-40Close Tolerance Screw
- 5305-00-239-7776 MPN AIC813-4-R38Machine Screw
- 5305-00-345-1582 MPN LS15265V4-20Close Tolerance Screw
- 5305-01-054-6274 MPN AIC985-5-16Close Tolerance Screw
- 5305-01-067-5837 MPN AIC984-3-15Close Tolerance Screw
- 5305-01-188-7592 MPN LE111-0038-2408Close Tolerance Screw
- 5305-01-329-9961 MPN AIC4414-3-16Machine Screw
- 5305-01-381-1408 MPN AIC1701-4-12Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-330-3394 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
03A200-4-10 | Northrop Grumman Systems Corporation |
AIC1658-4-10 | Sps Technologies, Llc |
12398-4-10 | Sps Technologies, Llc |
SC3105-4-10 | Arconic Global Fasteners & Rings, |
12398-4-10 | Sps Technologies Inc |
SLB189-4-10 | Space-lok, Inc. |