NSN 5305-01-331-5809
High Torque Screw
Between 0.947 inches and 0.994 inches fastener length, flat countersunk head style, between 0.339 inches and 0.381 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number PBF1475-3-10 for national stock number 5305013315809.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-331-5809.
-
MPN or Model
PBF1475-3-10
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.338 inches -
Fastener Length
Between 0.947 inches and 0.994 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.339 inches and 0.381 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-030-2653 MPN 3M707-3-6-5Close Tolerance Screw
- 5305-01-386-2556 MPN VCL0009-3-9Machine Screw
- 5305-01-418-9857 MPN 3M1170D3-2AFClose Tolerance Screw
- 5305-01-435-6614 MPN BACB30LU9-27Close Tolerance Screw
- 5306-01-044-0740 MPN VAL22034-8G90Shear Bolt
- 5306-01-058-0734 MPN VFK101G12-044Shear Bolt
- 5306-01-172-8814 MPN HS4057-11Close Tolerance Bolt
- 5306-01-200-0661 MPN BACB30LJ4U9Close Tolerance Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-331-5809 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
PBF1475-3-10 | Sps Technologies, Llc |
124379-3-10 | Sps Technologies, Llc |
GB510FG3-10 | Northrop Grumman Systems Corporation |
VCL0009-3-10 | Valley-todeco, Inc. |
PBF1475-3-10 | Sps Technologies, Llc |
124379-3-10 | Sps Technologies, Llc |
GB510FG3-10 | Northrop Grumman Systems Corporation |
VCL0009-3-10 | Valley-todeco, Inc. |