NSN 5305-01-333-2719
High Torque Screw
Between 1.222 inches and 1.252 inches fastener length, flat countersunk head style, between 0.449 inches and 0.507 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number 03A174-4-13 for national stock number 5305013332719.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-333-2719.
-
MPN or Model
03A174-4-13
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
096660 - Screws NOI Silver Plated -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
Between 1.222 inches and 1.252 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.449 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
End Application
Support equipment (se), b-2 bomber; aircraft, b-2 bomber (atb) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Titanium alloy uns r56400 -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-046-6987 MPN NAS1101E06-12BMachine Screw
- 5305-00-080-9291 MPN 3MFR333CFA7Machine Screw
- 5305-00-880-7768 MPN AIC551C3-585Shoulder Screw
- 5305-01-158-5369 MPN AIC940-3-4Machine Screw
- 5305-01-329-7805 MPN AIC4414-06-8Machine Screw
- 5305-01-332-2173 MPN AIC1700-5-7AClose Tolerance Screw
- 5305-01-381-2172 MPN AIC1701-3-13Close Tolerance Screw
- 5305-01-381-2172 MPN 1701-3-13Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-333-2719 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
03A174-4-13 | Northrop Grumman Technical Services, |
123743-4-13 | Sps Technologies, Llc |
AIC1652-4-13 | Sps Technologies, Llc |
03A174-4-103A174-4-13 | Arconic Global Fasteners & Rings, |
03A174-4-103A174-4-13 | Sps Technologies, Llc |
03A174-4-103A174-4-13 | Space-lok, Inc. |
03A174-4-103A174-4-13 | Huck International, Inc. |
03A174-4-103A174-4-13 | Sps Technologies, Llc |
03A174-4-103A174-4-13 | Herman Machine Inc |
03A174-4-103A174-4-13 | Sps Technologies, Llc |
SC3102-4-13 | Sps Technologies Inc |
T009-4-13 | Huck Intl Inc |
03A174-4-13 | Northrop Grumman Systems Corporation |
HR240-4-13 | Hi-shear Corporation |
SLB146-4-13 | Space-lok, Inc. |
03A174-4-13 | Northrop Grumman Systems Corporation |
PBF1417-4-13 | Sps Technologies, Llc |
03A174-4-13 | Hi-shear Corporation |
SC3102-4-13 | Arconic Global Fasteners & Rings, |
PBP1417-4-13 | Sps Technologies, Llc |
12743-4-13 | Sps Technologies, Llc |