NSN 5305-01-334-1050
High Torque Screw
Between 0.910 inches and 0.940 inches fastener length, flat countersunk head style, between 0.3206 inches and 0.4045 inches head diameter, grip diameter: between 0.1890 inches and 0.1895 inches .
Manufacturer part number AIC1701-3-9 for national stock number 5305013341050.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-334-1050.
-
MPN or Model
AIC1701-3-9
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
093490 - Bolt/nut/screw/clips/fastener/etc -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.363 inches -
Fastener Length
Between 0.910 inches and 0.940 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.3206 inches and 0.4045 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
95000 pounds per square inch -
Countersink Angle
Between 129.0 degrees and 131.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Titanium alloy uns r56400 -
Material Specification
Ams 4928 assn standard single material response or ams 4967 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-188-7465 MPN AIC4038-06-32Machine Screw
- 5305-01-264-5049 MPN AIC39C4A6Machine Screw
- 5305-01-303-6353 MPN AIC939-3-8Close Tolerance Screw
- 5305-01-359-8042 MPN AIC1198-3-8Machine Screw
- 5305-01-373-3017 MPN AIC551C-06-199Shoulder Screw
- 5305-01-382-0693 MPN AIC985-3D-4HClose Tolerance Screw
- 5305-01-627-5895 MPN JSFB38-10-27DMachine Screw
- 5305-01-646-1411 MPN JSFB15V3-3Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-334-1050 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC1701-3-9 | Sps Technologies, Llc |
111395-3-9 | Sps Technologies, Llc |
3D0080-3-9 | Boeing Company, The |
SC5053-3-9 | Arconic Global Fasteners & Rings, |
1701-3-9 | Sps Technologies, Llc |
5053-3-9 | Arconic Global Fasteners & Rings, |