NSN 5305-01-334-4059
High Torque Screw
2.988 inches fastener length, pan no. 2 head style, 0.189 inches grip diameter, internal drive style: offset cruciform (torque set).
Manufacturer part number NAS1578A3T42 for national stock number 5305013344059.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-334-4059.
-
MPN or Model
NAS1578A3T42
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.363 inches -
Fastener Length
2.988 inches -
Head Style
Pan no. 2 -
Grip Diameter
0.189 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
2.625 inches -
Thready Qty Per Inch (tpi)
32 -
Material
Steel -
Thread Series Designator
Unjf
More from these suppliers
- 5935-01-323-4641 MPN MS33687-24-28PElectrical Connector Insert
- 5940-01-386-4758 MPN NAS1063B105-120Terminal Board Marker Strip
- 5305-00-043-3643 MPN MS51964-38Setscrew
- 5305-00-052-7000 MPN NAS1096-2-5Machine Screw
- 5305-00-057-0492 MPN MS24694-S6Machine Screw
- 5305-00-068-1652 MPN MS51029-37Setscrew
- 5305-00-068-5411 MPN MS16995-3Socket Head Cap Screw
- 5305-00-081-2651 MPN MS51038-15Setscrew
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-334-4059 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1578A3T42 | National Aerospace Standards |