NSN 5305-01-334-4215
High Torque Screw
Between 0.876 inches and 0.906 inches fastener length, flat countersunk head style, between 0.704 inches and 0.762 inches head diameter, grip diameter: between 0.3735 inches and 0.3745 inches .
Manufacturer part number NAS1156E8D for national stock number 5305013344215.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-334-4215.
-
MPN or Model
NAS1156E8D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.391 inches -
Fastener Length
Between 0.876 inches and 0.906 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.704 inches and 0.762 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.116 inches first hole -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.375 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.746 inches first hole and 0.786 inches first hole -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1156 professional/industrial association standard
More from these suppliers
- 5935-00-111-1891 MPN NAS1665-14Electrical Connector Backshell
- 5940-01-303-7067 MPN NAS1747-11Conductor Splice
- 5305-00-008-3700 MPN NAS1191E04P6LSocket Head Cap Screw
- 5305-00-052-8886 MPN MS24630-22Tapping Screw
- 5305-00-058-2897 MPN NAS601-26PMachine Screw
- 5305-00-069-5583 MPN MS90725-99Hexagon Head Cap Screw
- 5305-00-078-0177 MPN NAS1351-00LN6PSocket Head Cap Screw
- 5305-00-116-0034 MPN NAS1153E4Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-334-4215 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1156E8D | National Aerospace Standards |