NSN 5305-01-335-2919
High Torque Screw
Between 0.886 inches and 0.916 inches fastener length, flat countersunk head style, between 0.328 inches and 0.385 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number NAS1153E10D for national stock number 5305013352919.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-335-2919.
-
MPN or Model
NAS1153E10D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 0.886 inches and 0.916 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.328 inches and 0.385 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole and 0.080 inches first hole -
Internal Drive Style
Torque-set ribbed -
Thread Diameter
0.190 inches -
Grip Length
Between 0.615 inches and 0.635 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.759 inches first hole and 0.799 inches first hole -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas1153 professional/industrial association standard
More from these suppliers
- 5940-01-391-1828 MPN NAS1063B46-50Terminal Board Marker Strip
- 5305-00-045-3179 MPN MS24694S102Machine Screw
- 5305-00-052-5084 MPN NAS338CPA17Close Tolerance Screw
- 5305-00-053-1107 MPN MS35199-113Machine Screw
- 5305-00-058-7609 MPN MS24694S129Machine Screw
- 5305-00-059-3670 MPN MS51958-74Machine Screw
- 5305-00-086-2454 MPN NAS1202-7Close Tolerance Screw
- 5305-00-144-0417 MPN NAS1101-06H6Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-335-2919 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1153E10D | National Aerospace Standards |