NSN 5305-01-336-0702
High Torque Screw
Between 2.101 inches and 2.121 inches fastener length, flat countersunk head style, between 0.704 inches and 0.762 inches head diameter, locking feature: detent ball grip.
Manufacturer part number MS27577-6-25 for national stock number 5305013360702.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-336-0702.
-
MPN or Model
MS27577-6-25
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.523 inches and 0.559 inches -
Fastener Length
Between 2.101 inches and 2.121 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.704 inches and 0.762 inches -
Locking Feature
Detent ball grip -
Grip Diameter
Between 0.3733 inches and 0.3742 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.116 inches first hole -
Internal Drive Style
High-torque -
Thread Diameter
0.375 inches -
Grip Length
Between 1.562 inches and 1.578 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
95000 pounds per square inch -
Hardness Rating
36.0 rockwell c fastener and 41.0 rockwell c fastener -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.986 inches first hole and 2.016 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel comp e4340 fastener or steel comp 4140 fastener or steel comp 8740 fastener or steel comp 6150 fastener -
Surface Treatment
Cadmium fastener and chromate fastener -
Surface Treatment Specification
Qq-p-416, ty2 cl2 federal specification single treatment response fastener -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-001-4713 MPN NAS1102C04-18Machine Screw
- 5305-00-008-5893 MPN NAS1102C08-8PMachine Screw
- 5305-00-052-5967 MPN MS35202-12Machine Screw
- 5305-00-061-0266 MPN MS51029-50Setscrew
- 5305-00-068-5278 MPN MS24677-41Socket Head Cap Screw
- 5305-00-177-5485 MPN NAS1189C06P10NSocket Head Cap Screw
- 5305-00-269-2817 MPN MS90726-73Hexagon Head Cap Screw
- 5305-00-271-5214 MPN MILS7839Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-336-0702 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS27577-6-25 | National Aerospace Standards |
MS27577-6-25 | Military Standards |