NSN 5305-01-336-3215
High Torque Screw
Between 0.580 inches and 0.610 inches fastener length, flat countersunk head style, between 0.328 inches and 0.385 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number 03A161-3D4P for national stock number 5305013363215.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-336-3215.
-
MPN or Model
03A161-3D4P
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.320 inches and 0.370 inches -
Fastener Length
Between 0.580 inches and 0.610 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.328 inches and 0.385 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole and 0.080 inches first hole -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.406 inches first hole and 0.456 inches first hole -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-435-0185 MPN BACB30LU14-49XClose Tolerance Screw
- 5306-00-925-9696 MPN VFK100G-04016Shear Bolt
- 5306-01-052-5101 MPN C4356-3D-0680Shoulder Bolt
- 5306-01-117-0662 MPN VCG001-12D44Close Tolerance Bolt
- 5306-01-133-4846 MPN VEP220121-4V11Shear Bolt
- 5306-01-141-7888 MPN VAL23608-4-53Shoulder Bolt
- 5306-01-148-3679 MPN VCG0009-4-4Shear Bolt
- 5306-01-214-5045 MPN VCD0004-6-S-48Shear Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-336-3215 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
03A161-3D4P | Northrop Grumman Systems Corporation |
X007-3D4P | Huck International, Inc. |
X007-3D4P | Huck Intl Inc |
SLB217-3D4P | Space-lok, Inc. |
03A161-3D4P | Northrop Grumman Systems Corporation |
VCL0008-3D4P | Valley-todeco, Inc. |
AIC4410-3D4P | Sps Technologies, Llc |
PBF1419-3D4P | Sps Technologies, Llc |
HR242-3D4P | Hi-shear Corporation |
123741-3D4P | Sps Technologies, Llc |