NSN 5305-01-336-3216
High Torque Screw
Between 0.705 inches and 0.735 inches fastener length, flat countersunk head style, between 0.328 inches and 0.385 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number 03A161-3D6P for national stock number 5305013363216.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-336-3216.
-
MPN or Model
03A161-3D6P
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.320 inches and 0.370 inches -
Fastener Length
Between 0.705 inches and 0.735 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.328 inches and 0.385 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole and 0.080 inches first hole -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.531 inches first hole and 0.581 inches first hole -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-680-5923 MPN BACB30LU4-17Close Tolerance Screw
- 5305-01-045-2902 MPN BACB30LU5-23Close Tolerance Screw
- 5305-01-111-4201 MPN BACB30LU3P2Close Tolerance Screw
- 5305-01-207-9339 MPN BACS12CK3U10Machine Screw
- 5305-01-412-6378 MPN LD111-0045-2410Close Tolerance Screw
- 5305-01-435-6611 MPN BACB30LU9-26Close Tolerance Screw
- 5306-00-151-5761 MPN GB511GF18-56Shear Bolt
- 5306-00-324-7194 MPN VAL23033-5H65Close Tolerance Bolt
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-336-3216 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
03A161-3D6P | Northrop Grumman Systems Corporation |
SLB217-3D6P | Space-lok, Inc. |
X007-3D6P | Huck International, Inc. |
03A161-3D6P | Northrop Grumman Systems Corporation |
VCL0008-3D6P | Valley-todeco, Inc. |
AIC4410-3D6P | Sps Technologies, Llc |
PBF1419-3D6P | Sps Technologies, Llc |
HR242-3D6P | Hi-shear Corporation |
123741-3D6P | Sps Technologies, Llc |
HR242-3D6P | Lisi Aerospace Canada Corp |
X007-3D6P | Huck Intl Inc |