NSN 5305-01-336-6321
High Torque Screw
Between 0.433 inches and 0.463 inches fastener length, flat countersunk head style, between 0.338 inches and 0.381 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number NAS7503-2 for national stock number 5305013366321.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-336-6321.
-
MPN or Model
NAS7503-2
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.323 inches -
Fastener Length
Between 0.433 inches and 0.463 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.338 inches and 0.381 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Grip Length
Between 0.115 inches and 0.135 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response or ams 5737 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas7503 professional/industrial association standard
More from these suppliers
- 5940-01-352-8022 MPN NAS1063A15-3SCTerminal Board
- 5940-01-425-6513 MPN NAS1063A5-446Terminal Board Marker Strip
- 5305-00-019-9444 MPN MS16208-145Hexagon Head Cap Screw
- 5305-00-020-3639 MPN NAS1100C06-8Machine Screw
- 5305-00-021-3740 MPN MS35307-364Hexagon Head Cap Screw
- 5305-00-046-7439 MPN NAS1151C-23Close Tolerance Screw
- 5305-00-052-6909 MPN MS24629-5Tapping Screw
- 5305-00-068-7064 MPN MS35277-44Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-336-6321 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS7503-2 | National Aerospace Standards |
Stock Check
- NE: 13487
- NS: 781