NSN 5305-01-337-5962
High Torque Screw
Between 1.137 inches and 1.184 inches fastener length, flat countersunk undercut head style, between 0.475 inches and 0.507 inches head diameter, head height: between 0.071 inches and 0.073 inches .
Manufacturer part number HT357E4-12 for national stock number 5305013375962.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-337-5962.
-
MPN or Model
HT357E4-12
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.403 inches -
Fastener Length
Between 1.137 inches and 1.184 inches -
Head Style
Flat countersunk undercut -
Head Diameter
Between 0.475 inches and 0.507 inches -
Head Height
Between 0.071 inches and 0.073 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.250 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Features Provided
O ring -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches bearing surface of head32.0 microinches grip32.0 microinches threads -
Material
Rubber butadiene-acrylonitrile class nbr ringnickel alloy 718 fastener -
Material Specification
Ams 5662 assn standard single material response fastener -
Surface Treatment
Passivate fastener -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-057-1692 MPN HT5A16Machine Screw
- 5305-00-211-9354 MPN NAS1142E1Close Tolerance Screw
- 5305-00-620-2680 MPN HT239PB4-13Close Tolerance Screw
- 5305-00-890-0082 MPN NAS1203-1Close Tolerance Screw
- 5305-01-008-2892 MPN HT193LB4H9Close Tolerance Screw
- 5305-01-020-5930 MPN NAS1184E4Close Tolerance Screw
- 5305-01-064-4046 MPN NAS1189E06P5BSocket Head Cap Screw
- 5305-01-082-9290 MPN ST3M547-5-14Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-337-5962 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT357E4-12 | Hi-shear Corporation |
HT357E4-12 | Lisi Aerospace Canada Corp |