NSN 5305-01-337-5977
High Torque Screw
Between 2.064 inches and 2.111 inches fastener length, flat countersunk undercut head style, between 0.966 inches and 1.014 inches head diameter, head height: between 0.157 inches and 0.160 inches .
Manufacturer part number HT357E8-21 for national stock number 5305013375977.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-337-5977.
-
MPN or Model
HT357E8-21
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.768 inches -
Fastener Length
Between 2.064 inches and 2.111 inches -
Head Style
Flat countersunk undercut -
Head Diameter
Between 0.966 inches and 1.014 inches -
Head Height
Between 0.157 inches and 0.160 inches -
Grip Diameter
Between 0.4990 inches and 0.4995 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.500 inches -
Grip Length
Between 1.302 inches and 1.322 inches -
Features Provided
O ring -
Thready Qty Per Inch (tpi)
20 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches bearing surface of head32.0 microinches grip32.0 microinches threads -
Material
Rubber butadiene-acrylonitrile class nbr ringnickel alloy 718 fastener -
Material Specification
Ams 5662 assn standard single material response fastener -
Surface Treatment
Passivate fastener -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-008-5879 MPN NAS1191E04P4LHSocket Head Cap Screw
- 5305-00-283-7514 MPN HT308-4-16Close Tolerance Screw
- 5305-00-754-3063 MPN HT6M34Close Tolerance Screw
- 5305-00-761-1263 MPN 51B223-57HMachine Screw
- 5305-00-764-3023 MPN HT4UA4-13Machine Screw
- 5305-00-834-0129 MPN 53B333-3Machine Screw
- 5305-00-944-5905 MPN 53B333-6Machine Screw
- 5305-01-097-8221 MPN HT4067-4-9AClose Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-337-5977 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT357E8-21 | Hi-shear Corporation |
HT357E8-21 | Lisi Aerospace Canada Corp |