NSN 5305-01-337-6997
High Torque Screw
Between 0.847 inches and 0.894 inches fastener length, flat countersunk undercut head style, between 0.350 inches and 0.381 inches head diameter, head height: between 0.044 inches and 0.046 inches .
Manufacturer part number HT357E3-8 for national stock number 5305013376997.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-337-6997.
-
MPN or Model
HT357E3-8
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.363 inches -
Fastener Length
Between 0.847 inches and 0.894 inches -
Head Style
Flat countersunk undercut -
Head Diameter
Between 0.350 inches and 0.381 inches -
Head Height
Between 0.044 inches and 0.046 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Features Provided
O ring -
Thready Qty Per Inch (tpi)
32 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Surface Finish
32.0 microinches bearing surface of head32.0 microinches grip32.0 microinches threads -
Material
Rubber butadiene-acrylonitrile class nbr ringnickel alloy 718 fastener -
Material Specification
Ams 5662 assn standard single material response fastener -
Surface Treatment
Passivate fastener -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-069-5200 MPN HT4A-14Machine Screw
- 5305-00-080-9239 MPN 3MA584-12Machine Screw
- 5305-00-105-6911 MPN BB302-8-6Machine Screw
- 5305-00-283-7459 MPN HT271A5-9Close Tolerance Screw
- 5305-00-390-0648 MPN NAS1190E04P7Socket Head Cap Screw
- 5305-00-449-2433 MPN NAS1102-04-12Machine Screw
- 5305-00-541-9033 MPN LS15234C3-1Close Tolerance Screw
- 5305-00-916-4879 MPN HR-102-3-4Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-337-6997 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HT357E3-8 | Hi-shear Corporation |
HT357E3-8 | Lisi Aerospace Canada Corp |