NSN 5305-01-338-0915
High Torque Screw
Between 0.683 inches and 0.713 inches fastener length, pan no. 2 head style, between 0.367 inches and 0.373 inches head diameter, head height: between 0.122 inches and 0.133 inches .
Manufacturer part number NAS7803U6 for national stock number 5305013380915.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-338-0915.
-
MPN or Model
NAS7803U6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.298 inches and 0.348 inches -
Fastener Length
Between 0.683 inches and 0.713 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.367 inches and 0.373 inches -
Head Height
Between 0.122 inches and 0.133 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.190 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches bearing surface of head32.0 microinches grip32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response or ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjc -
Specification Data
80205-nas7803 professional/industrial association standard
More from these suppliers
- 5940-01-384-3892 MPN NAS1063A8TB98TTerminal Board Marker Strip
- 5935-01-669-1857 MPN 031-2373Electrical Plug Connector
- 5305-00-008-5882 MPN NAS1101E04-4PMachine Screw
- 5305-00-008-5914 MPN NAS1100E06-28Machine Screw
- 5305-00-066-7336 MPN NAS1743C02R10USocket Head Cap Screw
- 5305-00-150-3179 MPN MS24693C342Machine Screw
- 5305-00-151-2726 MPN MILS7839Machine Screw
- 5305-00-152-5653 MPN MS24693C104Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-338-0915 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS7803U6 | National Aerospace Standards |