NSN 5305-01-338-3140
High Torque Screw
Between 0.910 inches and 0.935 inches fastener length, flat countersunk head style, 0.111 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number NAS1790V4R8A for national stock number 5305013383140.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-338-3140.
-
MPN or Model
NAS1790V4R8A
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
096640 - Screws, Iron Or Steel -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.354 inches and 0.425 inches -
Fastener Length
Between 0.910 inches and 0.935 inches -
Head Style
Flat countersunk -
Head Diameter
0.111 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Torque-set ribbed -
Thread Diameter
0.250 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Titanium alloy uns r56400 -
Material Specification
Ams 4928 assn standard single material response or ams 4967 assn standard single material response -
Surface Treatment
Aluminum -
Thread Series Designator
Unjf -
Specification Data
80205-nas1790 professional/industrial association standard
More from these suppliers
- 5935-00-111-1891 MPN NAS1665-14Electrical Connector Backshell
- 5305-00-008-5897 MPN NAS1102E5-14Machine Screw
- 5305-00-059-3655 MPN NASM51958-59Machine Screw
- 5305-00-059-8264 MPN MS35214-39Machine Screw
- 5305-00-127-5685 MPN NAS1152V3Close Tolerance Screw
- 5305-00-139-6754 MPN MS3213-7Machine Screw
- 5305-00-141-6372 MPN NAS604-52PMachine Screw
- 5305-00-143-9689 MPN NAS1146-12Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-338-3140 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1790V4R8A | National Aerospace Standards |
Stock Check
- NE: 9805
- NS: 22