NSN 5305-01-338-3356
High Torque Screw
Between 0.573 inches and 0.603 inches fastener length, flat countersunk head style, 0.083 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number NAS1790V3R4A for national stock number 5305013383356.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-338-3356.
-
MPN or Model
NAS1790V3R4A
-
Schedule B
8109.90.0000 (Zirconium and articles thereof nesoi) -
NMF (National Motor Freight)
096660 - Screws NOI Silver Plated -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.276 inches and 0.338 inches -
Fastener Length
Between 0.573 inches and 0.603 inches -
Head Style
Flat countersunk -
Head Diameter
0.083 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Torque-set ribbed -
Thread Diameter
0.190 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Titanium alloy uns r56400 -
Material Specification
Ams 4928 assn standard single material response or ams 4967 assn standard single material response -
Surface Treatment
Aluminum -
Thread Series Designator
Unjf -
Specification Data
80205-nas1790 professional/industrial association standard
More from these suppliers
- 5935-00-499-2085 MPN NAS1643R10T5SNElectrical Plug Connector
- 5940-01-451-4409 MPN NAS1063A2-107AKTerminal Board Marker Strip
- 5935-00-111-1891 MPN NAS1665-14Electrical Connector Backshell
- 5305-00-022-3095 MPN NAS1352-7LE16PSocket Head Cap Screw
- 5305-00-068-9183 MPN MS35202-55Machine Screw
- 5305-00-144-0508 MPN NAS1121-6HClose Tolerance Screw
- 5305-00-163-5310 MPN NAS514P440-5BMachine Screw
- 5305-00-257-1899 MPN MS27039DD0815Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-338-3356 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1790V3R4A | National Aerospace Standards |
NAS1790V3R4A | National Aerospace Standards |
NAS1790V3R4A | National Aerospace Standards |