NSN 5305-01-338-4021
High Torque Screw
Between 1.410 inches and 1.440 inches fastener length, flat countersunk head style, between 0.258 inches and 0.305 inches head diameter, grip diameter: between 0.1885 inches and 0.1895 inches .
Manufacturer part number H185-3-17 for national stock number 5305013384021.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-338-4021.
-
MPN or Model
H185-3-17
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.363 inches -
Fastener Length
Between 1.410 inches and 1.440 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.258 inches and 0.305 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 1.052 inches and 1.072 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp h11 -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-197-6224 MPN NAS1102-06-6BMachine Screw
- 5305-00-433-4579 MPN AIC1351H033Socket Head Cap Screw
- 5305-00-680-5889 MPN BACB30LU-4D-35Machine Screw
- 5305-00-680-5923 MPN BACB30LU4-17Close Tolerance Screw
- 5305-01-012-2012 MPN A1C812-04-12Machine Screw
- 5305-01-114-0607 MPN NAS1101E4-14Machine Screw
- 5305-01-123-7098 MPN 965812-410CMachine Screw
- 5305-01-232-7462 MPN 0018-019-000Socket Head Cap Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-338-4021 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
H185-3-17 | Huck International, Inc. |
AIC985-3-17 | Sps Technologies, Llc |
PBF1166-3-17 | Sps Technologies, Llc |
121558-3-A17P | Sps Technologies, Llc |
VT1694F3-17 | Alcoa Global Fasteners, Inc. |
C7985-3-17 | Lockheed Martin Corporation |
C7985-3-17 | Sps Technologies, Llc |
H185-3-17 | Huck Intl Inc |