NSN 5305-01-338-4975
High Torque Screw
Between 2.827 inches and 2.859 inches fastener length, flat countersunk undercut head style, between 0.623 inches and 0.633 inches head diameter, head height: 0.133 inches .
Manufacturer part number NAS335-26 for national stock number 5305013384975.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-01-338-4975.
-
MPN or Model
NAS335-26
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.531 inches -
Fastener Length
Between 2.827 inches and 2.859 inches -
Head Style
Flat countersunk undercut -
Head Diameter
Between 0.623 inches and 0.633 inches -
Head Height
0.133 inches -
Grip Diameter
Between 0.3112 inches and 0.3117 inches -
Internal Drive Style
Hexagon -
Thread Diameter
0.3125 inches -
Grip Length
2.312 inches -
Width Across Flats
Between 0.1885 inches and 0.1905 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
100.0 degrees -
Material
Steel comp 4140 -
Material Specification
Mil-s-5626 military specification single material response -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf -
Specification Data
80205-nas335-26 professional/industrial association standard
More from these suppliers
- 5940-01-451-4409 MPN NAS1063A2-107AKTerminal Board Marker Strip
- 5305-00-051-2325 MPN MS51958-94Machine Screw
- 5305-00-074-4436 MPN NAS623-5-6Machine Screw
- 5305-00-113-3733 MPN NAS560CK3-7Machine Screw
- 5305-00-205-3597 MPN MS51958-71BMachine Screw
- 5305-00-207-8253 MPN MS35307-308Hexagon Head Cap Screw
- 5305-00-211-9166 MPN NAS1218-3E9Machine Screw
- 5305-00-251-8262 MPN NAS560CK3-0Machine Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-01-338-4975 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS335-26 | National Aerospace Standards |